Los Angeles prices, reviewed
Sprinkler & Irrigation Repair Cost in Los Angeles
Sprinkler & Irrigation Repair in Los Angeles costs $120–$450, with a typical job around $285. We quote a flat price upfront, before any work starts.
Sprinkler & Irrigation Repair prices, job by job
| The job | Flat price |
|---|---|
| Simple sprinkler & irrigation repairOne straightforward job with easy access. | $120 |
| Most sprinkler & irrigation repair jobsTypical time: 1–3 hours. | around $285 |
| Bigger or trickier sprinkler & irrigation repairSeveral price drivers stacked on one visit. | up to $450 |
Every number in the table is the whole flat price for the job in Los Angeles. You approve it before we start, and it changes only if the job itself changes.
Long punch lists and projects with no fixed scope. Billed by the hour, so the total depends on how long it runs.
What the lower end buys
Two or three broken heads swapped out, nozzles matched to the zone, spray patterns dialed in so the water lands on the lawn instead of the sidewalk, and each zone run from the controller while we stand and watch it. Shallow work, easy digging.
What the higher end buys
Cracked lateral lines under a dry compacted lawn, a leaking valve down in a buried box, or a controller replaced with every zone reprogrammed run the number up. Chasing a buried leak takes digging and patience, and hard late-summer soil out here fights the shovel.
Want an exact price for your job?
Pick your job, see your upfront price, and book this week with a local pro.
Typical range for Sprinkler & Irrigation Repair: $120–$450. Your exact flat quote depends on the job, and you approve it first.
What moves your quote
A simple job with easy access lands near $120. When several of the factors below stack up, the quote moves toward $450. We look at your specifics, quote one flat price, and you approve it before we start. The quote is free.
- •Number of zones & heads
- •Broken pipe vs head swap
- •Controller / timer setup
- •Valve & solenoid repair
- •Digging through dry compacted soil
- •Locating a buried line
- •Pressure across the system
Biggest price driver
Digging is what costs you here. A head at grade unscrews and a new one goes on in minutes. A break down in the lateral means locating it, opening a trench, cutting out the bad section, gluing in a repair, then waiting for the joint to set.
How to keep your sprinkler & irrigation repair cost down
Every zone run the day before, with a note on which heads spray wrong, means we start with a map instead of a search. Cut the grass short around the heads, and flag anything buried in the yard that a shovel should avoid.
Recent work in Los Angeles
Flat-priced sprinkler & irrigation repair jobs we have finished. Our own photos, not stock.
Before you book it out
How far you can get on your own, and where the job stops being yours.
What to Check on Your Sprinklers in October
The tools it takes, and the point where it stops being a job for a Saturday.
Read the guideOther jobs you might need
Often booked alongside sprinkler & irrigation repair. Each has its own flat-rate guide.
Sprinkler & Irrigation Repair cost: FAQ
What does sprinkler & irrigation repair cost in Los Angeles?
Most sprinkler & irrigation repair jobs run $120 to $450. A typical job lands near $285. We quote one flat price upfront, so you know the cost before any work starts.
What makes sprinkler & irrigation repair cost more or less?
The biggest drivers are number of zones & heads, broken pipe vs head swap, controller / timer setup, and valve & solenoid repair. A simple job with easy access sits near $120. When several of those stack up, we quote closer to $450.
What does the sprinkler & irrigation repair price include?
Your flat quote covers the work itself: Replace broken or clogged heads, Fix leaks and broken lines, and Adjust spray patterns and coverage. Labor and the visit are in the price, with no separate trip fee.
Which sprinkler & irrigation repair jobs does this price range cover?
We book these most often: Broken sprinkler heads, Leaking pipe or valve, Zone won’t turn on, and Controller / timer setup. All of them sit inside the $120 to $450 range, and anything unusual gets its own flat quote once we see it.
Do you charge by the hour or a flat rate?
Sprinkler & Irrigation Repair is flat-priced per job, so there are no hourly surprises. Typical time: 1–3 hours. For bigger open-ended projects we bill $85–$125/hour.
Can I save by booking other jobs at the same time?
Often yes. Bundling two or three fixes into one visit gets you the best value per job, and sprinkler & irrigation repair pairs well with gutter cleaning and fence & gate repair. Send us the whole list and we will quote it all together.