Los Angeles prices, reviewed
Pressure Washing Cost in Los Angeles
Pressure Washing in Los Angeles costs $150–$400, with a typical job around $275. We quote a flat price upfront, before any work starts.
Christmas lights up now, down in January
Pressure Washing prices, job by job
| The job | Flat price |
|---|---|
| Simple pressure washingOne straightforward job with easy access. | $150 |
| Most pressure washing jobsTypical time: 1–3 hours by area size. | around $275 |
| Bigger or trickier pressure washingSeveral price drivers stacked on one visit. | up to $400 |
Every number in the table is the whole flat price for the job in Los Angeles. You approve it before we start, and it changes only if the job itself changes.
Long punch lists and projects with no fixed scope. Billed by the hour, so the total depends on how long it runs.
What the lower end buys
Flat concrete with a working hose bib nearby and nothing parked on it sits here: a two-car driveway, or a front walkway with the porch thrown in. Pre-rinse, detergent where the grime has set, then a clean rinse and the runoff swept off the walk.
What the higher end buys
Painted stucco, wood siding and fence boards take a soft wash at low pressure so the finish survives, and that runs slower than blasting concrete. Put a second story, a long fence line and set-in oil or mildew together and the pace drops further still.
Want an exact price for your job?
Pick your job, see your upfront price, and book this week with a local pro.
Typical range for Pressure Washing: $150–$400. Your exact flat quote depends on the job, and you approve it first.
What moves your quote
A simple job with easy access lands near $150. When several of the factors below stack up, the quote moves toward $400. We look at your specifics, quote one flat price, and you approve it before we start. The quote is free.
- •Area washed (square footage)
- •Surface (driveway, siding, fence)
- •Stain severity (oil, mildew)
- •Access & height
- •Water source on site
- •Soft wash vs high pressure
- •Debris & runoff cleanup
Biggest price driver
Surface type sets the pace. Concrete takes full pressure and cleans fast. Stucco, painted wood and gray fence boards need a detergent soak, a gentle pass and a patient rinse, because too much pressure lifts paint off the wall and furs up the grain.
How to keep your pressure washing cost down
Book the driveway, the walkway and the patio as one visit instead of three. Move cars, planters and hoses out of the way first, and point out the outdoor spigot that works so nobody hunts around for water.
Recent work in Los Angeles
Flat-priced exterior & seasonal jobs we have finished. Our own photos, not stock.
Before you book it out
How far you can get on your own, and where the job stops being yours.
How to Tell Your Gutters Are Clogged Without Climbing Up
Overflowing gutters are what stain the walkway you are about to wash. Check them from the ground first.
Read the guideOther jobs you might need
Often booked alongside pressure washing. Each has its own flat-rate guide.
Pressure Washing cost: FAQ
What does pressure washing cost in Los Angeles?
Most pressure washing jobs run $150 to $400. A typical job lands near $275. We quote one flat price upfront, so you know the cost before any work starts.
What makes pressure washing cost more or less?
The biggest drivers are area washed (square footage), surface (driveway, siding, fence), stain severity (oil, mildew), and access & height. A simple job with easy access sits near $150. When several of those stack up, we quote closer to $400.
What does the pressure washing price include?
Your flat quote covers the work itself: Pre-rinse & detergent where needed, Pressure/soft wash by surface, and Driveway, patio, walkway, siding, fence. Labor and the visit are in the price, with no separate trip fee.
Which pressure washing jobs does this price range cover?
We book these most often: Grimy driveway/patio, Mildew on north-facing walls, Pre-sale curb appeal, and Oil stains. All of them sit inside the $150 to $400 range, and anything unusual gets its own flat quote once we see it.
Do you charge by the hour or a flat rate?
Pressure Washing is flat-priced per job, so there are no hourly surprises. Typical time: 1–3 hours by area size. For bigger open-ended projects we bill $85–$125/hour.
Can I save by booking other jobs at the same time?
Often yes. Bundling two or three fixes into one visit gets you the best value per job, and pressure washing pairs well with exterior painting and deck repair. Send us the whole list and we will quote it all together.