Los Angeles prices, reviewed
Fence & Gate Repair Cost in Los Angeles
Fence & Gate Repair in Los Angeles costs $150–$700, with a typical job around $425. We quote a flat price upfront, before any work starts.
Fence & Gate Repair prices, job by job
| The job | Flat price |
|---|---|
| Simple fence & gate repairOne straightforward job with easy access. | $150 |
| Most fence & gate repair jobsTypical time: half to full day. | around $425 |
| Bigger or trickier fence & gate repairSeveral price drivers stacked on one visit. | up to $700 |
Every number in the table is the whole flat price for the job in Los Angeles. You approve it before we start, and it changes only if the job itself changes.
Long punch lists and projects with no fixed scope. Billed by the hour, so the total depends on how long it runs.
What the lower end buys
Sagging gates come back square with a tension cable or a fresh hinge set, broken pickets get swapped in, and the latch is realigned so it catches on the first push. Everything reachable from your side, with the posts still solid in the ground.
What the higher end buys
Three or four rotted posts dug out, reset in concrete and left to cure before the panels go back, sits high in the range. Posts are the slow part of any fence, and a run down a slope has to be stepped section by section so the top line stays straight.
Want an exact price for your job?
Pick your job, see your upfront price, and book this week with a local pro.
Typical range for Fence & Gate Repair: $150–$700. Your exact flat quote depends on the job, and you approve it first.
What moves your quote
A simple job with easy access lands near $150. When several of the factors below stack up, the quote moves toward $700. We look at your specifics, quote one flat price, and you approve it before we start. The quote is free.
- •Linear feet / sections
- •Material (wood, vinyl, chain-link)
- •Post replacement & concrete
- •Gate sag & hardware
- •Digging & concrete cure time
- •Neighbor-side access
- •Slope along the fence line
Biggest price driver
Post condition drives the number. Boards and hinges are quick work. A post snapped off at ground level has to come out with its old footing, a new one set plumb and braced, and the concrete left alone for a day before any weight hangs on it.
How to keep your fence & gate repair cost down
Repair the sections that failed instead of replacing the whole run, and reuse pickets that are still sound. Clear the fence line on both sides, cut the vines back, and let the neighbor know we may need a minute on their side.
What the money buys, start to finish
One job, photographed before we started and after we finished.
Recent work in Los Angeles
Flat-priced fence & gate repair jobs we have finished. Our own photos, not stock.
Before you book it out
How far you can get on your own, and where the job stops being yours.
Why Your Gate Sags, and What to Check Before the Wind
The tools it takes, and the point where it stops being a job for a Saturday.
Read the guideOther jobs you might need
Often booked alongside fence & gate repair. Each has its own flat-rate guide.
Fence & Gate Repair cost: FAQ
What does fence & gate repair cost in Los Angeles?
Most fence & gate repair jobs run $150 to $700. A typical job lands near $425. We quote one flat price upfront, so you know the cost before any work starts.
What makes fence & gate repair cost more or less?
The biggest drivers are linear feet / sections, material (wood, vinyl, chain-link), post replacement & concrete, and gate sag & hardware. A simple job with easy access sits near $150. When several of those stack up, we quote closer to $700.
What does the fence & gate repair price include?
Your flat quote covers the work itself: Reset leaning posts, Replace broken boards/panels, and Fix sagging gates & hinges. Labor and the visit are in the price, with no separate trip fee.
Which fence & gate repair jobs does this price range cover?
We book these most often: Leaning / wobbly fence, Gate won't close or latch, Rotted posts, and Storm-damaged panels. All of them sit inside the $150 to $700 range, and anything unusual gets its own flat quote once we see it.
Do you charge by the hour or a flat rate?
Fence & Gate Repair is flat-priced per job, so there are no hourly surprises. Typical time: half to full day. For bigger open-ended projects we bill $85–$125/hour.
Can I save by booking other jobs at the same time?
Often yes. Bundling two or three fixes into one visit gets you the best value per job, and fence & gate repair pairs well with deck repair and pressure washing. Send us the whole list and we will quote it all together.