Los Angeles prices, reviewed
Toilet Repair & Installation Cost in Los Angeles
Toilet Repair & Installation in Los Angeles costs $150–$350, with a typical job around $250. We quote a flat price upfront, before any work starts.
Toilet Repair & Installation prices, job by job
| The job | Flat price |
|---|---|
| Simple toilet repair & installationOne straightforward job with easy access. | $150 |
| Most toilet repair & installation jobsTypical time: 1–2 hours. | around $250 |
| Bigger or trickier toilet repair & installationSeveral price drivers stacked on one visit. | up to $350 |
Every number in the table is the whole flat price for the job in Los Angeles. You approve it before we start, and it changes only if the job itself changes.
Long punch lists and projects with no fixed scope. Billed by the hour, so the total depends on how long it runs.
What the lower end buys
We sit at the low end replacing a toilet in a ground-floor bath where the flange is sound and the shutoff turns. Old unit drained, pulled and hauled off, new wax ring and bolts set, the bowl leveled, supply connected, then flushed and watched for seepage.
What the higher end buys
Cracked or rusted flanges, a bowl that rocks on uneven tile, or a heavy one-piece unit carried up a flight of stairs push toward the top. A bad flange has to be repaired or replaced before the new toilet can seal, and that all happens at floor level.
Want an exact price for your job?
Pick your job, see your upfront price, and book this week with a local pro.
Typical range for Toilet Repair & Installation: $150–$350. Your exact flat quote depends on the job, and you approve it first.
What moves your quote
A simple job with easy access lands near $150. When several of the factors below stack up, the quote moves toward $350. We look at your specifics, quote one flat price, and you approve it before we start. The quote is free.
- •Remove & haul old toilet
- •New wax ring & bolts
- •Shutoff valve / supply line
- •Flange condition
- •One-piece vs two-piece
- •Upstairs carry
- •Tile floor around the base
Biggest price driver
Flange condition is the whole story. A sound flange means a wax ring and a straight set. A cracked, corroded or sunken one gets a repair ring or a full replacement, and if the subfloor around it has gone soft from a slow leak, that comes first.
How to keep your toilet repair & installation cost down
A toilet delivered and unboxed in the bathroom before we come, with the seat and bolt kit alongside it, saves a trip to the van. Adding a faucet swap or a caulking job to the same trip puts two fixes behind one visit.
What the money buys, start to finish
One job, photographed before we started and after we finished.
Recent work in Los Angeles
Flat-priced plumbing jobs we have finished. Our own photos, not stock.
Before you book it out
How far you can get on your own, and where the job stops being yours.
How to Replace a Faucet
A toilet swap starts at a shutoff valve too, and an old one that will not close changes the whole job.
Read the guideOther jobs you might need
Often booked alongside toilet repair & installation. Each has its own flat-rate guide.
Toilet Repair & Installation cost: FAQ
What does toilet repair & installation cost in Los Angeles?
Most toilet repair & installation jobs run $150 to $350. A typical job lands near $250. We quote one flat price upfront, so you know the cost before any work starts.
What makes toilet repair & installation cost more or less?
The biggest drivers are remove & haul old toilet, new wax ring & bolts, shutoff valve / supply line, and flange condition. A simple job with easy access sits near $150. When several of those stack up, we quote closer to $350.
What does the toilet repair & installation price include?
Your flat quote covers the work itself: Remove & haul old toilet, New wax ring, bolts & seal, and Set & level new toilet. Labor and the visit are in the price, with no separate trip fee.
Which toilet repair & installation jobs does this price range cover?
We book these most often: Running / leaking toilet, Rocking / loose toilet, Upgrade to new model, and Weak / clogged flush. All of them sit inside the $150 to $350 range, and anything unusual gets its own flat quote once we see it.
Do you charge by the hour or a flat rate?
Toilet Repair & Installation is flat-priced per job, so there are no hourly surprises. Typical time: 1–2 hours. For bigger open-ended projects we bill $85–$125/hour.
Can I save by booking other jobs at the same time?
Often yes. Bundling two or three fixes into one visit gets you the best value per job, and toilet repair & installation pairs well with faucet replacement and caulking & sealing. Send us the whole list and we will quote it all together.